Build a great house for under $10,000

I was needing to build a guest house. Inexpensive, but strong, well insulated, attractive and off-grid ready.  There is a series of YouTube videos featuring Bob Vila building houses with Steel Shipping Containers, sometimes called CONEX boxes.  When finished, they make attractive houses, indistinguishable from others in the tract.  But the cost per square foot is about on par with standard construction at $150 to $200 per square foot.  Other than the appeal to save-the-earth recyclers, I have a hard time seeing the point.  There has to be a better way.

Done, for less than one tenth the cost.

A little over a  year ago, I bought two CONEX boxes to build a guest house.  They cost $2k each, delivered in rural Tennessee from Atlanta.
I put them on six steel reinforced concrete piers next to the main house.   I purchased good quality used double pane windows and doors from a local salvage place for about three bars of a song.  It was handy to already have plenty of dry storage with the containers already in place.  The old saying “time is money” turns out applies not only to the cost of labor and capital, but to one’s ability to buy materials at a discount.  A dry, secure place to store materials while you take the time necessary to buy frugally and build is an important feature of CONEX boxes that saves lots of money.  Over months, that dry storage was put to good use to accumulate inexpensive surplus or used components like sinks, toilets, cabinets, counters, carpet, tile and a wood burning stove from CraigsList, eBay and other local salvage sources.

Immediately on delivery, the boxes are dry and secure.  But they aren’t insulated and that’s a big deal on a house.  Without it, these steel boxes become ice boxes in winter and ovens in summer.  We are fortunate to live in an area where Tyson has forced the closure of all the older chicken houses.  That’s good in several ways.  First, the toxic stench is gone.  Second, the neighboring chicken farmers are no longer subject to Tyson’s vassal labor conditions.  Third, the chicken houses are slowly being disassembled and sold for scrap metal and the 1 to 2 inch thick foam insulation panels are often discarded.  I acquired two kinds of insulation for less than a song (about the chorus of Yankee Doodle Dixie), almost nothing.  The spun glass type went over the container tops and under the low-pitch steel roof.   Because each container is built to handle the weight of ten or fifteen more containers stacked on it, each loaded with tons of cargo in hurricane force winds on a tossing ocean, there’s no worry about having a higher pitched roof to carry a snow load, especially in mild southern winters.

With a plasma cutter, a friend cut holes in the sides of the CONEX for doors and windows and a gaping hole between them to open up a large space for a living area.   It was a fairly simple task to frame the holes with standard 2X4’s and install doors and windows.  Using standard framing and drywall, it was easy to add interior walls for a storage room, bathroom, bedroom, kitchen, living/dining area and laundry room.  Needing more space in the main house, the laundry was immediately moved into the end of one of the CONEX boxes, installing plumbing and electrical in the process.  A huge chest freezer was added.   In short order, parts of the new house were functional even before it was insulated. The thick marine plywood floors could be easily drilled for plumbing.  Used cabinets and the electrical panel (also bought used) were easily mounted to the steel walls in the new laundry room and hooked up by a licensed electrician.

Then I installed more vertical studs on the exterior walls, screwing them flat, directly to the steel walls from the inside.  The two-inch depth of the studs is perfect to frame the 2 inch thick insulation panels.  Next, I ripped some treated deck boards and screwed them horizontally into the vertically oriented studs. I nestled another 1 inch layer of insulation panels between the deck boards and on top of the 2 inch ones.  That makes three inches of solid foam insulation on the walls, almost what you would have in a commercial walk-in freezer.   With the insulation in place the difference was immediately gratifying.  The space, while not yet aesthetically pleasing, was comfortable and livable.  People interested in sustainable housing often speak of the relative advantages of insulation vs. thermal mass.  With the container house, you get both!  By putting the insulation on the outside, tons of steel are on the interior where the mass absorbs, retains and radiates heat or cold from AC, wood burning stove or other heating system.  This thermal mass helps keep interior temperatures relatively even.  Meanwhile, the insulation on the exterior keeps the extreme temperatures outside.  Another benefit of putting the insulation on the outside is that it doesn’t eat up precious interior space.  Finally, top off the insulation with exterior siding, and Wa-La, it’s beginning to look pretty nice.  Eventually, as time permits, I am thinking of cladding the exterior with cord-wood harvested from the property to give it a rustic feel.

A trip to Dalton, Georgia, just across the Tennessee border was well worth it.  Dalton is the carpet and flooring capital of America.  I found a great deal on commercial quality carpet squares that stay in place without glue or tacking.  You can easily replace just the soiled or worn ones.  Granite tiles go under the wood stove and vinyl for the kitchen and bath.  I love the look of the corrugated steel walls.  Granted, they aren’t the smooth drywall look most people are accustomed to, but something a little different is nice.  So, keep the variation in the walls.  Simply paint them with some lively colors and accent the larger reinforcing members and doors with a contrasting color.  It wouldn’t be hard to overlay the steel walls with drywall or paneling, but if you enjoy a different look and like saving the time and money, paint works just fine.  I especially like the back-splash wall behind the kitchen sink.  Blending several vibrant colors, you can create a rainbow effect that gives life to the kitchen.  The deep corrugation in the steel is perfect for up or down lights that wash the wall and intensify the colors.  “Inexpensive”, “innovative” and “attractive”.

CONEX guest house kitchen

As you work with these big steel boxes, there are endless outlets for creative innovation to be discovered.  Once set on the level, you have already conquered the carpenter’s primary challenge – plumb, level and square.  After that, it’s just a matter of hanging stuff on them.  Rather than try to make the finished product look and act just like the surrounding cracker-box tract houses, it’s fun to  tease out the unique benefits of building with them.  From thermal mass/insulation qualities to the unique undulating aesthetics of corrugated walls, to very serious economic benefits, there is  a lot to be learned and achieved with steel shipping container construction.

This project is only the beginning.  The goal is to make this little house sustainable and off-grid with the same kinds of economic savings.   Use Solar PV (photo-voltaic), but spend $10k or less to do it.  Use hydro-electric from the 50′ waterfall nearby and wind.  Integrate and balance these complementary renewable power sources for both the house and transportation.  Use the battery pack on a golf cart to flexibly store and supply energy to the house, the cart and portable applications like running an electric chain saw or MIG welder somewhere out on the 750 acres that make up the Village.  Folks in the Village on Sewanee Creek are looking for the freedom that intelligent, frugal, debt-free design can afford.  We’re experimenting with these and other abundant lifestyle solutions.  Thankfully, we share and help one another in our common goals, so I don’t have to do it all myself.

If this appeals to you, contact me for more info or a tour here

More shots of the completed guest house are in my talk on sustainability at the University of the South

10/16/17 read about, see new photos of this updated house, now available to experience for yourself at Stay in our Amazing CONEX Tiny Home

 

21 thoughts on “Build a great house for under $10,000

  1. Pingback: Low Cost Ownership @ the Village on Sewanee Creek « Self-Sufficient Living

  2. I am an African working with a small team of Americans in Ghana on low cost housing projects. Would you please want to join the next work team from the US to Ghana in 2013? Pls let me know so I can connect you to my US partners.

    Like

    • Hey my name is zineb, me and my husband are planning on moving to Ghana from America. We don’t know much about Ghana but we want to get a small house built but we don’t know how much it cost. We will be coming there with $20,000 usd but we are trying to spend $10,000 usd minimum to build the house. Could anyone help with further info please ??

      Like

  3. I was very pleased to uncover this web site. I want to to thank you for ones time due to this wonderful read!! I definitely loved every part of it and I have you saved as a favorite to check out new things on your blog.

    Like

  4. I like this idea, by using shipping containers you get sturdy walls and a roof all in one. But I was wondering what did you use for foundations(assuming they were already there) and how much extra did that cost?

    Like

    • The foundation can be fairly easy and inexpensive. I used 12″ diameter Sono tubes (concrete pouring forms) from Lowe’s. Dug 6 holes a couple feet deep, placed a cage of rebar in the tubes, poured the concrete, and welded steel plate to the rebar on top of the piers. The piers have to be aligned perfectly with the corners of the container and level, of course. Next, weld the containers to the steel plate. That gives you both a securely anchored house and grounding of the steel containers through the piers. A better but more expensive alternative would be a continuous rebar reinforced concrete footing with cement block to make a closed crawl space or even a basement. The containers can still be welded to rebar that reinforce the corners.

      Like

        • Good question. After opening the walls between the two containers, I tried sealing the crack between the two using several methods. All leaked. Then I built a truss system and gradually sloping metal roof over the top with spun glass insulation between the two roofs. That solved two problems plus an extra benefit. The sloping roof plus the carport added to the front of the house doubled the catchment area of my rainwater system. It’s a simple little house but works well.

          After cladding the exterior with styro insulation and smart siding, you can’t tell from the outside that it was built from containers.

          Like

  5. Thanks for sharing! I remember on my visit there the beginning of the work. Looks like you have made great progress. I agree with you in that there are frugal options available if you are creative and patient! I am building a tiny house on my land and I am tracking the many cost savers I am finding along the development road. I just finished insulating this weekend with freecycled finds! Again, thanks for sharing…an inspiration!

    Like

  6. I was looking into doing something similiar in my town but the county and state have all these building codes and need engineers to sign off on things in order to build. How did you get around this?

    Like

  7. Its really a great and useful piece of information. Im glad that you shared this useful info with us. Please keep us informed like this. Thanks for sharing. ffdeadcbbdek

    Like

  8. Thanks just for sharing.It had been seriously excellent reading in relation to your entire opinion of this subject matter.I had been searching for this kind of write up for awhile,and gratefully i came accross your site.I hope you certainly will continue to keep assisting people in a similar manner in future also.

    Like

  9. Pingback: Stay in our Amazing CONEX Tiny Home – the Village on Sewanee Creek

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.